Prices incl. VAT plus shipping costs
Free shipping from 600 EuroDelivery time: 2 - 4 working days
Order within 65 hours, 0 minutes and 19 seconds for guaranteed shipment monday, 11.11.2024
- Order number: A0004462
Height 1: | 8 mm |
Height 2: | 9 mm |
Height 3: | 32 mm |
Length: | 120 cm |
Gradient: | 2 % |
Material: | Stainless steel (V2A 1.4301) |
Interface: | fine ground, brushed |
Strength: | 1 mm ± 0,10 mm |
Brand: | DURAL |
Series: | SHOWER GK |
Variant: | Left side |
- Height 1 = Maximum pavement thickness
- Height 2 = Total front height
- Height 3 = Total rear height
- Side selection facing the gutter
Our DURAL inclined wedge 120 cm to wall connection made of finely ground stainless steel is perfect for installing your floor-level shower. Wall tiles are glued to the vertical leg, making this inclined wedge perfect for floor-level showers in corner areas. The one-piece profiles form a slope of about 2% to ensure proper drainage. The sloping wedges also clad the side cheeks of floor-level showers with the brushed surface, we offer variants for the left and right side here. The one-piece inclined wedge is made of only one element in stainless stainless steel (V2A) and enables a visually appealing transition to the wall. The finely ground surface creates a uniform as well as high-quality look and is also easy to clean. The leg is also designed so that flexible adjustment to deviations is also possible.
You will find further gradient wedges from DURAL made of high-quality V2A stainless steel in the lengths 98 cm and 148 cm as well as in the common heights (8 mm, 10 mm, and 12.5 mm) in our store.
Our tip from alleszumfliesen.de: Order the profiles 1-2 mm higher than the wall covering you want to lay.
As a compound sealant, we recommend our ETAG-tested DURABASE ET-S composite waterproofing systemhere you will find all the components you need!
Processing:
To shorten the profile, always cut the inclined wedge at the highest point.
Press the inclined wedge with perforated fixing leg into the fresh adhesive bed and align. Align the adjoining wall tiles so that the upper edge of the slope profile is flush with the tile. Cavity-free tile installation in the profile area - connecting joint 1.5 mm wide. Completely fill the joint space with grout.
Cleaning instructions
stainless steel never clean with abrasive media such as steel wool, as this may damage the surface, resulting in flash rust. Cleaning agents used must be free of chlorine and hydrochloric acid.