DURAL LED Connecting cable

• High quality
• Short delivery time

The DURAL LED connection cable has clips on both sides to connect two strips directly DURAL LED Stiff directly with each other. This cable is used for the installation of LED strips in the area of stairs. For example with our DURAL LED Stair profile Florentine black. The cable allows you to make a connection between the LED strips to each step of the stairs. The clips must be clicked on the copper points of the strip, leaving as large an area as possible of the copper on the strip to ensure contact. When connecting the strips, you should always pay attention to the exact polarity, for this purpose the + and - markings can be seen on the strip.

Brief instruction

1. Attach the clip, which is present on the DURAL LED Connecting cable with the first LED Strip.
2. Connect the second strip to the other clip of the cable.
3. IMPORTANT! Pay attention to the correct polarity. This is marked on the LED strip with + and -.

Tip:

If a connected strip does not light up, check the copper contacts on the clip again.

If a strip should light up in a different color, the pulsing is probably not correct. Turn the strip so that the polarity is the same for both strips. Pay attention to the +/- marking on the DURAL LED strip.