Placeholder for leveling

• Inexpensive shipping of small parts
• Easy assembly
• Fast delivery

This 2-piece leveling system can be used for medium and large format tiles up to a tile size of 100 x 100 cm. The leveling system can be used from a joint width of only 1.5 mm. Our leveling system is suitable for laying tiles on walls and floors, as well as indoors and outdoors. In addition to the placeholders you need Leveling rings. This leveling system is suitable for tiles from 3 to 12 mm thick.

The interaction of the leveling rings with the snap-off holder allows tile edges to be perfectly plumb and installed without leaving any visible residue or requiring much effort. The reusable leveling rings also prevent tiles from shifting during the drying process.

How the tile installation system works:

1. Use a notched trowel to apply the tile adhesive evenly to the floor. After that, align the tile.
2. One by one, place the spacers against the tile. Keep checking the correct position of the tiles, as corrections are only possible as long as the adhesive has not yet set.
3. After you have placed the next tile, place a leveling ring around the placeholder, now press the ring onto the placeholder until both tiles are evenly level.
4. Now proceed like this row by row.
5. When the tile adhesive has dried after 24 hours, the holders should break off at the predetermined breaking point after a light footstep.
6. The plastic rings can be used again and again.