Cart
Your cart is empty.
Continue shoppingDrainage mats are used for outdoor installations, especially where sealed surfaces are involved. The mats are particularly suitable for...
The Subsoil
Without the right substrate, which forms the basis for the final result, nothing works. Basically, you can lay tiles on any substrate, however, the factors of appearance and preventing damage from moisture play a major role! But beware! Different floors = different properties. This means that the respective preparatory work must be individually adapted to the respective substrate.
Generally speaking: The substrate must be firm, load-bearing, dust-free and dry. The surface should be even and any cracks must be filled.
Possible problems that may occur:
Waterlogging
Due to errors in the sealing slope, such as elevations in the overlap area or unevenness, water can accumulate under tile coverings.
Frost and heat
When laying ceramic floors outdoors, for example on balconies or terraces, tile coverings are exposed to high thermal stresses, which can lead to long-term damage in the floor structure.
Cracks in the pavement structure
These lead to severe moisture penetration into the flooring, accompanied by tile detachment, hollow spaces, efflorescence, and structural damage.
The solution: Drainage mats
The DURABASE DR 100++ drainage mat is a highly dimensionally stable and pressure-resistant, closed-cell polypropylene sheet with a dimpled structure, equipped with a laminated mesh fabric. The dimpled side with the mesh fabric, on which the covering structure rests, acts as a drainage layer with very high water conductivity. The truncated cone-shaped dimples and their varying heights allow for a sufficiently large drainage capacity even under heavy loads. The material is rot-proof and age-resistant. Remnants can be disposed of with normal household waste.
The flooring constructions with DURABASE DD 80 ++ can be chosen very flexibly and thus offer a maximum degree of adaptability to the respective object:
A drainage mat is always made of plastic. It usually consists of a mat with special bumps. These bumps form cavities after installation, in which seepage water can collect. The water is then drained from these cavities without pressure to a drainage point.
The special arrangement of the differently high bumps of 6 and 8 mm height ensures a permanently sufficiently large drainage space, even with heavy loads. The space between the bump sheet and the grid fabric also allows the pavement structure to dry quickly. Furthermore, the sealing is largely protected from thermal and mechanical stress.
Without a drainage mat, water could linger in various areas for a very long time and could potentially cause damage there.
Use of drainage mats
Drainage mats are used in outdoor installations, especially where sealed surfaces are involved. DURABASE DR 100++ is particularly suitable for creating large-area drainage systems in combination with tiles, slabs, natural stone and concrete slabs, as required for example on balconies, terraces, pavements, swimming pool surrounds, etc.
Therefore, the most important areas of application are:
The installation of drainage mats under natural stone slabs is particularly important. Natural stone slabs that are laid in a layer of crushed stone can also have a drainage mat underneath the crushed stone layer.
If you want to lay drainage mats under tiles, the drainage mats are glued between the substrate and the tile covering. Tiles can be easily laid on the mats. However, drainage mats do not replace the substrate sealing. The substrate on which the mats are to be laid must also be sealed separately. Our blog post " Laying Tiles - Sealing Explained Simply " can help you here. In addition, it must also have a sufficient slope so that the water collected in the mats can drain away quickly.
Function as a decoupling mat
Another important benefit – besides water drainage – is that drainage mats always also function as decoupling mats . They effectively decouple the tile covering from the substrate, thus helping to prevent stress cracks and movements of the tile covering with subsequent cracks in the grout.
Drainage or water drainage?
Basically, the most important factor for using a drainage system is the type of surface covering the terrace. There are two major differences:
With a permeable pavement, surface water seeps through the pavement into the subbase. From there, it should also seep into the ground as quickly as possible. If water accumulates in the subbase, this can lead to damage to the subbase due to frost and the constant water level. The decisive factor for a possibly necessary drainage of the subbase through drains is the soil type. Heavy or cohesive soils (such as very clayey soil types) allow water to seep through only slowly. In this case, additional drainage must be provided.
With a waterproof surface, not only should the surface itself be drained (in many places, this is even mandatory for driveways), but also the substructure, if possible. This prevents damage to the substructure caused by penetrating water. For example, water can seep through tile joints over longer periods of time. If drainage mats are installed below the surface, penetrating water can be drained away relatively quickly. In addition, the surface (e.g. tiles) is effectively decoupled from the substrate. This also helps to avoid stress cracks.
The use of drainage mats under natural stone paving is particularly recommended. They are also available for loosely laid paving. In these areas, they then also replace any necessary adjustable supports.
Installation instructions
Notes:
In general, the generally accepted rules of technology must be observed!
For all products/materials: The suitability for mechanical and chemical stress must be carefully checked in each individual case before laying the mat. Protect material from prolonged exposure to sunlight.
If you should have any further questions, please feel free to contact us.
Best of luck with the tiling!
The team from Everything for Tiles