- Self-adhesive sealing membrane, compliant with standards and ETA-tested.
- Easy & super fast application because the adhesive application is eliminated, simply spray the area to be sealed beforehand with the WS spray primer .
- Sealing without dust and dirt - no mess and always clean work phases.
Want to learn even more about our self-adhesive sealing system? Then you'll surely like our article " DURABASE WarpSeal - efficient & time-saving sealing solution ", where you can find detailed information about the series and processing.
Product safety information:
Manufacturer:
Dural GmbH, South Ring 11
56412 Ruppach-Goldhausen
Germany
Email:
Info@dural.de
Areas of application for the self-adhesive waterproofing membrane WS:
OurSelf-adhesive waterproofing membrane WSSuitable for all surfaces indoors that need to be protected from moisture.
Regardless of whether it is a smooth or uneven surface, thisself-adhesive sealing membraneprovides a reliable seal.
Here's how to install our self-adhesive WS sealing membrane:
- Prepare the substrate:
In the first step, the surface to which theself-adhesive sealing membraneThe surface to which the product is to be applied must be cleaned of dirt and dust. The substrate is then sprayed with the primer. Use a little more primer for highly absorbent substrates. Leveling measures must be completed beforehand. - Attach shaped parts such as corners and cuffs:
After the substrate has been properly prepared, the necessary shaped parts are applied first. To do this, simply remove the backing film and press the corresponding shaped part against the wall. Smooth out bubbles as much as possible with a squeegee. - Seal transition and corner areas:
For this purpose, the self-adhesive sealing tape WS is used. Simply peel off the film on the back and use a squeegee or spirit level to press the tape into the corner areas. - Applying self-adhesive sealing membranes:
Now the cut-to-size strips can be... They are applied by first removing the central strip on the back of the sheet. Now align the sheet at the appropriate position. Ensure that the dark yellow areas of the shaped parts are overlapped. Once the sheet is positioned, the film on the back can be carefully peeled off while simultaneously smoothing out any bubbles with a squeegee. Further sheets should always be applied overlapping the dark yellow edge strip of the previous sheet, so that these areas are covered with fleece. - Dark yellow edge stripes withNon-woven fabric stripsto complete:
Before you can start laying the tiles, any remaining dark yellow edge strips must be covered with the self-adhesive strip.
Once the sealant has been completely applied, you can start laying the tiles immediately.
You can find detailed instructions from the manufacturer here:
Installation instructions for self-adhesive waterproofing membrane WS
